Universitas Gajah Mada (UGM) in collaboration with TOTAL E&P Indonesie (TEPI) will present a two-days seminar on “Total Days on Deep Offshore and Technical Expertise”. The lecture will be conducted in English.
It will be held ib Faculty of Engineering UGM, Yogyakarta on 2-3 May, 2013. The certificate of attendance will be distributed at the end of program.
UGM and TEPI have the right to limit the participants if the total participants exceeding the limit (maximum 60-70 participants). The presenter short biographies and agenda are shown in the following:
Host at its
- Ir. M. Waziz Wildan M.Sc., Ph.D. (Vice Dean of Engineering Faculty on Academic & Students)
- Ir. Lukito Edi Nugroho M.Sc., Ph.D. (Vice Dean of Engineering Faculty on Cooperation UGM)
- Ahmad Agus Setiawan ST., M.Sc., Ph.D. (Manager of Students, Research & Cooperation UGM)
- Prof. Dr. Ir. Jamasri (Head Dept of Mechanical Engineering – UGM)
Short Bio of Presenters
Total Day on Deep Offshore, 2 May 2013
- Mr. Nicolas Cambefort (Project & Construction): is Vice President Projects Construction with 21 years of involvement in Oil & Gas projects. His experienced growth from onshore development in Venezuela to offshore development in Nigeria and then He was project manager in 2000-2002 for TOTAL E&P INDONESIE based in Jakarta.
- Mr. Patrick Grivot (Business Development): is Technical Coordination Division Manager. He is a well-rounded Petroleum Engineer with 20 years ‘reservoir engineering studies, planning and development and new project management experiences in the Asia-Pacific Region, Middle-East, Africa , Russia and South America. As far as deep offshore is concerned, he carried out the development dossiers for new ventures which materialized by acquisition of Angolan blocks deep offshore, 2005 round, Nigeria and Gabon deep-offshore blocks. He was Planning Manager of Shtokman Project in the Barents Sea (Artic area).
- Mr. Alain Bachelot (Well Architecture): having cumulated 31 years of experiences in Oil and Gas operations mainly in drilling and well operations. He has worked in a lot of places around the globe. He started his deepwater experiences in Red sea in Egypt in 1985 and was involved in some deepwater development in Gulf of Mexico such as Canyon Express and Matterhorn. He is again in Indonesia to lead two Deep Offshore Exploration projects of TOTAL E&P INDONESIE i.e. South West Sumatera and Offshore Mahakam.
- Mr. Siswo Prayitno (Engineering): is Head of Project based in Balikpapan, with more than 20 years extensive experiences in Oil and Gas Industries. He has an opportunity in deepwater development when assigned as In-country Manager of Subsea Production System (SPS) package of USAN Deepwater Development in Nigeria – West Africa (2008). USAN is one of world class project of TOTAL worldwide involving some international contractors and multi-nations. He was back to Indonesia in 2011 and hold current position to take care of brown field project.
- Mr. Ramia Darma. He was graduated Chemical Engineering from Gadjah Mada University in 1996. He passed Heat Transfer Engineering course from Leibniz University Hannover Mechanical Engineering faculty, in Germany. Experiences on deepwater operations were gained during an international assignment in TOTAL Nigeria (2008) – Deep Water AKPO OML 130 –(the 1st Total Nigeria deep water exploration and the 1st biggest Total FPSO storage capacity)- In Field Operation team based in Lagos as “Process and Flow Assurance Engineering Manager”. Since 2013, Ramia is assigned to hold a new challenge becoming an Offshore Installation Manager (OIM) of Bekapai Field, Mahakam Middle Asset of TEPI.
Thursday, 2 May 2013
07:30 – 08:00 Students Registration
08:00 – 08:15 Welcoming Speech by UGM – Ir. M. Waziz Wildan M.Sc., Ph.D.
08.15 – 09.00 Lecture-1 “Intro on Deep Offshore Development” by N. Cambefort
09.00– 09.15 Q&A
09.15 – 10.00 Lecture-2 “Deepwater Field Development Architecture Selection” by P. Grivot
10.00 – 10.15 Q&A
10.15– 10.30 Coffee break
10.30 – 11.15 Lecture-3 “Well Construction Challenges on Deepwater Fields” by A. Bachelot
11.15 – 11.30 Q&A
11.30 – 12.15 Lecture-4 “Subsea Equipment: Manifolds (Usan Projects)” by S. Prayitno
12.15 – 12.30 Q&A
12.30– 13:30 Lunch break
13:30 – 14:15 Lecture-5 “Subsea Umbilical Riser and Flowlines (SURF)” by N. Cambefort
14:15 – 14:30 Q&A
14:30 – 15:15 Lecture-6 “Flow Assurance Management” by Ramia Darma
15:15 – 15:30 Q&A
15.30 – 15.45 Wrap-up by Nicolas Cambefort
15.45 – 16.00 Coffee Break and End of Program (photo gathering)
Tueday, 2 May 2013
07:00 Proceed from Hyatt Regency to UGM campus by 2 cars.
07:30 Presenters arrival at UGM (Office of Dean or office of Ir. M. Waziz Wildan M.Sc., Ph.D) meanwhile all registered students in the room.
07:45 – 08:00 Proceed to the room (will be notified), LCD preparation
08:00 – 08:15 Welcoming Speech by UGM – Ir. M. Waziz Wildan M.Sc., Ph.D.
08.15 – 09.00 Lecture-1 “Intro on Deep Offshore Development” by N. Cambefort
09.00– 09.15 Q&A
09.15 – 10.00 Lecture-2 “Deepwater Field Development Architecture Selection” by P. Grivot
10.00 – 10.15 Q&A
10.15– 10.30 Coffee break
10.30 – 11.15 Lecture-3 “Well Construction Challenges on Deepwater Fields” by A. Bachelot
11.15 – 11.30 Q&A
11.30 – 12.15 Lecture-4 “Subsea Equipment: Manifolds (Usan Projects)” by S. Prayitno
12.15 – 12.30 Q&A
12.30– 13:30 Lunch break
13:30 – 14:15 Lecture-5 “Subsea Umbilical Riser and Flowlines (SURF)” by N. Cambefort
14:15 – 14:30 Q&A
14:30 – 15:15 Lecture-6 “Flow Assurance Management” by Ramia Darma
15:15 – 15:30 Q&A
15.30 – 15.45 Wrap-up by Nicolas Cambefort
15.45 – 16.00 Coffee Break and End of Program (photo gathering)
Total Day on Technical Expertise, 3 May 2013
- Gianfranco Ungaro (Project Engineering): has cumulated experience in a wide range of Oil & Gas projects, ranging from engineering to safety in both onshore and offshore area. He had also experience in Artic development when, based in Paris, he was the Engineering Leader for Offshore of Shtokman project (first offshore project in Artic area). Other recent project experience includes the position of HSE engineer for an onshore Oil Plant located in Italy.
- Bondan Caroko (Process & Safety): He is a Process & Safety Engineer in Project Construction, graduated from Chemical Engineering UGM Yogyakarta. He has more than 8 years of experience in the Oil & Gas industry mainly in Process design/engineering for projects. He has also been involved in Safety engineering, project commissioning and HVAC engineering during his 6 years of career with TOTAL.
- Dirgo Soetontro (Instrumentation & Control System): Dirgo Soetontro graduated from Electrotechnical UGM with more that 20 years experience in Oil & Gas Industry including International experiences in various area such as Engineering, Construction, Precommissioning and Commissioning, and Project Control.
- Agung Prabowo (Electrical) : is Lead Electrical Engineer in Project Construction graduated from ITB which is responsible for electrical discipline for new project construction. He has more than 20 years experience in engineering, construction and pre-commissioning.
- Rony Heriana (Structure): master program graduate of Ocean Engineering ITB with 10 years working experience in various aspect of the offshore fixed platforms such as structural design and analysis for FEED, basic engineering, detail engineering, modification and assessment of existing oil and gas facilities.
- Irawan Josodipuro (Piping, Valves, Vessels) : graduated from Bachelor of Mechanical Engineering, ITS (Cum Laude) and Master Degree in Mechanical Engineering, Stanford University, USA. He got extensive training from ASME (American Society of Mechanical Engineers) Professional Development (Pressure Vessel, Piping), University of Stratchlyde-UK (British Standard of pressure vessel design).
- Arif Budi Wiranto (Corrosion) : is a corrosion engineer in Project Construction graduated from Material Engineering ITB (Cum Laude). He has more than 9 years of experience in corrosion prevention and mitigation activities and design including cathodic protection, coating and painting, and internal corrosion of surface facilities. He also has experiences related with laboratory and production chemical treatment.
- Achmad Arifin (Metallurgy & Welding) : is a Lead Welding Engineer in Project Construction graduated from ITS and master program on welding at Ecole Superieure de Soudure d’Applque (ESSA) France. He is responsible for welding, material, metallurgy and NDT for new project construction. He has more than 15 years experience in various industrial steel manufacturing include pressure vessel, pipeline, piping and offshore platform fabrication and inspection.
Friday, 3 May 2013
07:30 – 08:00 Students Registration
08.00 – 08.30 Lecture-1a “General Intro to Project Construction” by G. Ungaro
08.30 – 09:00 Lecture-1b “Engineering Studies in Oil & Gas Industry” by G. Ungaro
09.00– 09.15 Q&A
09.15 – 09.45 Lecture-2 “Process & Safety” by Bondan Caroko
09.45 – 10.00 Q&A
10.00– 10:15 Coffee break
10.15 – 10.45 Lecture-3 “Instrumentation/ Control System” by Dirgo Soetontro
10.45 – 11.00 Q&A
11.00 – 11.30 Lecture-4 “Electrical” by Agung Prabowo
11.30 – 11.45 Q&A
11.45– 13:15 Lunch break and Friday Praying. For whom not praying, the participants may have a “speed meeting” while lunch with Mr. G. Ungaro and teams.
13:15 – 13:45 Lecture-5 “Structure” by Rony Heriana
13:45 – 14:00 Q&A
14:00 – 14:30 Lecture-6 “Piping, Valve, Vessel” by Irawan Josodipuro
14:30 – 14:45 Q&A
14:45 – 15:15 Lecture-7 “Corrosion” by Arif Budi Wiranto
15.15– 15.30 Q&A
15.30 – 15.45 Coffee Break
15.45 – 16.15 Lecture 8 “Metallurgy & Welding” by Achmad Arifin
16.15- 16.30 Q&A
16.30 – 16.45 Wrap-up & attendance certificates’ hand-over (symbolic) by G. Ungaro
16.45 – 17.00 Closing & Memento’s hand-over by UGM – Ir. M. Waziz Wildan M.Sc., Ph.D.
17.00 End of Program (photo gathering)
Venue: Room 2.2 KPFT, Faculty of Engineering UGM
Free for Engineering For Engineering & Math and Natural Sciences UGM students Only.
Facilities: Ceritifiticate, Snack and Lunch.
Please register and fill the form at: Bagian Kemahasiswaan (Ibu Marsih), 3rd Floor KPFT. Before 27 April 2013 (Only 60 participants will be selected). SORRY WE’RE CLOSED
Download Daftar Peserta Hasil Seleksi